LEMON Manuals: Even more car manuals for everyone
Home >> Suzuki >> 2013 >> Kizashi Base, Standard Trans >> Repair and Diagnosis (Single Page) >> Engine Performance >> Engine Control Systems >> Engine Electrical Devices >> Repair Instructions >> ECT Sensor Removal and Installation >> Removal

ECT Sensor Removal and Installation: Removal

  1. Disconnect negative cable from battery.
  2. Remove engine cover.
  3. Drain coolant, see COOLING SYSTEM DRAINING .
  4. Disconnect connector from ECT sensor.
  5. Remove ECT sensor (1) from water outlet cap.
scientia non olet · About LEMON Manuals