LEMON Manuals: Even more car manuals for everyone
Home >> Suzuki >> 2013 >> Kizashi Base, Automatic CVT Trans >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Continuously Variable Transaxle (CVT) >> Repair Instructions >> Select Lever Assembly Removal and Installation >> Removal

Select Lever Assembly Removal and Installation: Removal

  1. Disconnect negative (-) cable at battery.
  2. Remove console box, see CENTER CONSOLE BOX REMOVAL AND INSTALLATION .
  3. Disconnect adjuster case (select cable end) from select lever assembly, see SELECT CABLE REMOVAL AND INSTALLATION .
  4. Disconnect select lever connector.
  5. Remove select lever nuts and detach select lever assembly from floor panel.
scientia non olet · About LEMON Manuals