Road Test: Notes
WARNING: This page is about a different variant/trim than selected.
The purpose of this test is to diagnose trouble conditions accurately and to check the condition after servicing. Also check for shift shock or abnormal noise.
WARNING:
If you do not select a suitable route and take proper precautions when performing a road test, an accident can occur.
- Select a level road with no traffic to minimize the risk of accident.
- Perform the test extremely carefully.
- Perform the road test using 2 persons, a driver and an assistant.
- Check CVT fluid level, see CVT Fluid Check .
- Warm up engine.
- With engine running at idle, shift select lever "D" range.
- Accelerate vehicle speed by depressing accelerator pedal gradually.
- While driving in "D" range, check if gear shift and lock-up occur properly as shown in CVT GEAR SHIFT TABLE .