LEMON Manuals: Even more car manuals for everyone
Home >> Suzuki >> 2012 >> SX4 Base >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Continuously Variable Transaxle (CVT)) >> Diagnostic Information and Procedures >> DTC P0962/P0963: Pressure Control Solenoid "A" Control Circuit Low/High >> DTC Confirmation Procedure >> P0963

DTC Confirmation Procedure: P0963

WARNING: This page is about a different variant/trim than selected.
NOTE:
  • If DTC other than aimed DTC are previously detected in DTC confirmation procedure, be sure to troubleshoot DTC previously detected.
  • Check that the following conditions are satisfied when using this procedure.
    • Battery voltage > 10.5 V
  1. Turn ignition switch to ON position for 10 sec.
scientia non olet · About LEMON Manuals