LEMON Manuals: Even more car manuals for everyone
Home >> Suzuki >> 2012 >> SX4 Base >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Continuously Variable Transaxle (CVT)) >> Diagnostic Information and Procedures >> DTC P0842/P0843: Transmission Fluid Pressure Sensor/Switch "A" Circuit Low/Transmission Fluid Pressure Sensor / Switch "A" Circuit High >> DTC Confirmation Procedure >> P0842/P0843

DTC Confirmation Procedure: P0842/P0843

WARNING: This page is about a different variant/trim than selected.
NOTE:
  • If DTC other than aimed DTC are previously detected in DTC confirmation procedure, be sure to troubleshoot DTC previously detected.
  • Check that the following conditions are satisfied when using this procedure.
    • Battery voltage > 10.5 V
    • CVT fluid temperature at engine start = -20 °C (-4 °F)
  1. Turn ignition switch to ON position for 10 sec.
scientia non olet · About LEMON Manuals