DTC Detecting Condition and Trouble Area
WARNING: This page is about a different variant/trim than selected.
P0826 SYMPTOM DIAGNOSIS DESCRIPTION CHART
| DTC detecting condition |
Trouble area |
DTC P0826: Manual mode Control Circuit
This DTC is detected if any one of the following conditions is fulfilled.
- Manual mode switch ON signal continues to be input for more than 5 sec. even after "P", "R" or "N" range signal input.
- ON signal of shift-down switch or shift-up switch is input for more than 5 sec. even while manual mode switch is OFF.
(1 D/C detection logic) |
- Manual mode shift switch (include manual mode switch, shift-up switch and shift-down switch) and/or its circuit
- TCM
|