LEMON Manuals: Even more car manuals for everyone
Home >> Suzuki >> 2012 >> SX4 Base >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Continuously Variable Transaxle (CVT)) >> Diagnostic Information and Procedures >> DTC P062F: Internal Control Module EEPROM Error >> DTC Troubleshooting

DTC Troubleshooting

WARNING: This page is about a different variant/trim than selected.
DTC P062F TROUBLESHOOTING CHART

Step Action YES NO
DTC check 
  1. Clear DTC. See DTC Clearance 
  2. Turn ignition switch to OFF position.
  3. Turn ignition switch to ON position and check DTC.

Is DTC P062F still indicated? 
Go to Step 2. Check for intermittent trouble. See INTERMITTENT AND POOR CONNECTION INSPECTION
TCM power supply and ground circuit check 
  1. Check TCM power supply circuit and ground circuit. See TCM Power Supply and Ground Circuit Check 

Are they in good condition? 
Substitute a known-good TCM and recheck. Repair or replace defective wire harness.