Brake and Key Interlock System Inspection

WARNING: This page is about a different variant/trim than selected.

Check that select lever cannot be moved to any other range from "P" range position when ignition key is at "ACC" position, at "LOCK" position or it is removed from keyhole of ignition switch, or brake pedal is not depressed.

Fig 1: Inspecting Range Position
Courtesy of SUZUKI OF AMERICA CORP.
Shift select lever to "P" range position, check for the following.
- Ignition key can be turned between "LOCK" and "ACC" positions back and forth and also it can be removed from ignition switch.
  
  Fig 2: Inspecting Brake And Key Interlock System - Shift Select Lever To "P" Range Position
  Courtesy of SUZUKI OF AMERICA CORP.
- When ignition switch is turned "ON" position and brake pedal is depressed, select lever can be shifted from "P" range position to any other range.
  
  Fig 3: Inspecting Brake And Key Interlock System - Ignition Switch Turned "On" Position
  Courtesy of SUZUKI OF AMERICA CORP.
With select lever shifted to any position other than "P" range, check that ignition key cannot be turned "LOCK" position and it cannot be removed from ignition switch unless it is at "LOCK" position.

Fig 4: Inspecting Brake And Key Interlock System - Select Lever Shifted To Any Position
Courtesy of SUZUKI OF AMERICA CORP.