4WD Control Module
SCAN TOOL DATA
| Scan tool data | Vehicle condition | Normal condition/reference values | |
|---|---|---|---|
| Accel Pedal Pos See Scan Tool Data Definitions | Ignition switch ON after warmed up engine | Accelerator pedal released | 0 - 5% |
| Accelerator pedal depressed fully | 90 - 100% | ||
| Engine Speed See Scan Tool Data Definitions | At engine idle speed | Engine idle speed is display | |
| 4WD Mode See Scan Tool Data Definitions | 2WD/4WD switch selected to 2WD position | 2WD | |
| 2WD/4WD switch selected to AUTO position | Auto | ||
| 2WD/4WD switch selected to LOCK position | Lock | ||
| ABS operating | ABS | ||
| Ignition switch ON and engine stop | Rly off | ||
| Stability control operating | Yaw con | ||
| ESP® operating | ESP® | ||
| 4WD Current See Scan Tool Data Definitions | Engine running | 0 - 200 mA | |
| Battery Voltage See Scan Tool Data Definitions | At engine idle speed | 10 - 14 V | |
| Coupling Temp See Scan Tool Data Definitions | Engine running | -40 °C - 100 °C (-40 °F - 212 °F) | |
| Wheelspeed (F) See Scan Tool Data Definitions | Vehicle stop | 0 km/h, 0 MPH | |
| Wheelspeed (R) See Scan Tool Data Definitions | Vehicle stop | 0 km/h, 0 MPH | |
| F-R Wheelspeed Diff See Scan Tool Data Definitions | Vehicle stop | 0 RPM | |
| 4WD Duty See Scan Tool Data Definitions | Ignition switch ON and 2WD/4WD switch selected to 2WD position | 0% | |