LEMON Manuals: Even more car manuals for everyone
Home >> Suzuki >> 2012 >> Equator Base >> Repair and Diagnosis >> General Information >> Reset Procedures >> Tire Pressure Monitor Systems >> TPMS Reset Procedures >> Tire Pressure Sensor Registration >> ID Registration (Without Transmitter Activation Tool)

ID Registration (Without Transmitter Activation Tool)

  1. Connect the SDT scan tool.
  2. Select ID REGIST under BCM.
  3. Adjust the tire pressure to the specified values in the Tire Pressure ID Registration Specifications  table, and drive the vehicle at 25 mph (40 km/h) or more for a few minutes.
    Tire Pressure ID Registration Specifications

    Tire Position Tire Pressure - psi (kPa)
    Front Left 36 (250)
    Front Right 33 (230)
    Rear Right 30 (210)
    Rear Left 27 (190)
  4. After completing all ID registrations, press "END" to complete the procedure.
  5. Inflate all tires to specification.
scientia non olet · About LEMON Manuals