Detailed Flow
WARNING: This page is about a different variant/trim than selected.
DIAGNOSTIC PROCEDURES
| Step | Action | YES | NO |
|---|---|---|---|
| 1 | COLLECT THE INFORMATION FROM THE CUSTOMER Get the detailed information from the customer about the symptom (the condition and the environment when the incident/malfunction occurred) using diagnosis worksheet. Refer to DIAGNOSIS AND REPAIR WORKFLOW . |
GO TO 2. | - |
| 2 | CHECK SYMPTOM 1 Check the following items based on the information obtained from the customer.
|
GO TO 3. | - |
| 3 | CHECK DTC
Is any DTC detected? |
GO TO 4. | GO TO 6. |
| 4 | PERFORM DIAGNOSTIC PROCEDURE Perform "Diagnosis Procedure" for the displayed DTC. |
GO TO 5. | |
| 5 | PERFORM DTC CONFIRMATION PROCEDURE Perform "DTC CONFIRMATION PROCEDURE". Is DTC detected? |
GO TO 4. | GO TO 6. |
| 6 | CHECK SYMPTOM 2 Try to confirm the symptom described by the customer. Is any malfunction present? |
GO TO 7. | Inspection End |
| 7 | ROAD TEST Perform "ROAD TEST". Refer to ROAD TEST . |
GO TO 8. | - |
| 8 | CHECK SYMPTOM 3 Try to confirm the symptom described by the customer. Is any malfunction present? |
GO TO 2. | Inspection End |