LEMON Manuals: Even more car manuals for everyone
Home >> Suzuki >> 2012 >> Equator Base >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Automatic Transmission System) >> Diagnostic information and Procedures >> Engine Cannot Be Started in "P" or "N" Position >> Diagnostic Procedure

Diagnostic Procedure

WARNING: This page is about a different variant/trim than selected.
DIAGNOSTIC PROCEDURE

Step Action YES NO
1  PERFORM DTC CHECK 
Perform "DTC check". Refer to [SDT FUNCTION (AT) ].
Do "DTC check" results indicate PNP switch? 		 Check the malfunctioning system. Refer to DTC P0705 PARK/NEUTRAL POSITION SWITCH  . GO TO 2.
2  CHECK CONTROL CABLE 
Check the control cable.

OK or NG 		 GO TO 3. Adjust control cable. Refer to [SHIFT CONTROL SYSTEM: INSPECTION AND ADJUSTMENT ].
3  CHECK STARTING SYSTEM 
Check the starting system. Refer to [STARTING SYSTEM: SYSTEM DESCRIPTION [A/T] ]
OK or NG 		 INSPECTION END  Repair or replace damaged parts.
scientia non olet · About LEMON Manuals