LEMON Manuals: Even more car manuals for everyone
Home >> Suzuki >> 2012 >> Equator Base >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Automatic Transmission System) >> Diagnostic information and Procedures >> DTC U1000: CAN COMM Circuit >> DTC Confirmation Procedure >> With SDT

With SDT

WARNING: This page is about a different variant/trim than selected.
  1. Turn ignition switch "ON". (Do not start engine.)
  2. Select "Data list" mode for "Engine / Powertrain" with SDT.
  3. Start engine and wait for at least 6 seconds.
  4. If DTC is detected, go to [Diagnosis Procedure ].
scientia non olet · About LEMON Manuals