LEMON Manuals: Even more car manuals for everyone
Home >> Suzuki >> 2012 >> Equator Base >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Automatic Transmission System) >> Diagnostic information and Procedures >> DTC P0705: Transmission Range Switch A >> DTC Confirmation Procedure >> With SDT

With SDT

WARNING: This page is about a different variant/trim than selected.
  1. Turn ignition switch "ON". (Do not start engine.)
  2. Select "Data list" mode for "AT" with SDT.
  3. Start engine.
  4. Drive vehicle and maintain the following conditions for at least 2 consecutive seconds.

    THRTL POS SEN: More than 1.2V 

  5. If DTC is detected, go to [DTC P0705 PARK/NEUTRAL POSITION SWITCH ].