LEMON Manuals: Even more car manuals for everyone
Home >> Suzuki >> 2012 >> Equator Base >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Automatic Transmission System) >> Diagnostic information and Procedures >> DTC P0615: Starter Relay >> DTC Confirmation Procedure >> With SDT

With SDT

WARNING: This page is about a different variant/trim than selected.
  1. Shift selector lever to "P" or "N" position.
  2. Turn ignition switch ON and wait for at least 2 seconds.
  3. Select "DTC check" mode for "AT" with SDT.
  4. If DTC is detected, go to [DTC P0615 START SIGNAL CIRCUIT ].
scientia non olet · About LEMON Manuals