Scan Tool Data List (3.6L) - Engine Cooling

The Engine Scan Tool Data List contains all cooling system related parameters that are available on the scan tool. The list is arranged in alphabetical order. A parameter may appear in any one of the data lists, and in some cases may appear more than once, or in more than one data list in order to group certain related parameters together.

The column labeled Data List indicates where a parameter is located on the scan tool. Review the scan tool operating manual for the exact locations of the data lists. The following is a description of each term listed:

All  The Parameter is in all data lists indicated below.

Eng  Engine Data

Ign  Ignition Data

EVAP  EVAP Data

FT  Fuel Trim Data

HO2S  HO2S Data

MF  Misfire Data

TAC  TAC Data

CMP  CMP Actuator Data

CH  Cooling/HVAC Data

CT  Cruise/Traction Data

ET  Electrical/Theft Data

Ind  Induction Data

IPC  IPC Data

IM  I/M Data

Trans  Transmission Data

FF  Freeze Frame Data

FR  Failure Records Data