Washer Solvent Container Replacement

WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Windshield Washer Solvent Container & Windshield Washer Solvent Hose

Courtesy of SUZUKI OF AMERICA CORP.

WASHER SOLVENT CONTAINER TABLE

Callout	Component Name
Preliminary Procedure Remove the driver side wheelhouse liner in order to access the washer container fasteners. Refer to FRONT WHEELHOUSE LINER REPLACEMENT . Drain the washer solvent into clean container. Remove the filler neck retainer from the radiator support.
1	Windshield Washer Container Screws (Qty: 2) CAUTION: Refer to FASTENER NOTICE . Tightening torque Tighten the screws to 2.5 N.m (22 lb in)
2	Windshield Washer Solvent Container Tip: Ensure the grommet is attached to the bottom of the container upon re-assembly into the engine compartment.
3	Windshield Washer Solvent Hose Tip: Disconnect the washer solvent hose from the washer pump and container.