Component Testing
WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.
Rear Wiper/Washer Switch
- With the rear wiper switch in the open position, test for infinite resistance between the ground terminal 1 and the signal terminal 2.
- If not the specified value, replace the rear wiper/washer switch.
- With the rear wiper switch in the closed position, test for less than 2 ohms of resistance between the ground terminal 1 and the signal terminal 2.
- If not within the specified range, replace the rear wiper/washer switch.