Installation Procedure

WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Inside Handle Rod & Lock Button Rod (2 Of 2)

Courtesy of SUZUKI OF AMERICA CORP.

Install the latch to the latch arm by twisting.
Connect the inside handle rod and lock button rod by aligning the rods with clips and twisting the latch.

Fig 2: Latch Electrical Connector
Courtesy of SUZUKI OF AMERICA CORP.
Connect the latch arm to the window regulator module by depressing the table and sliding rearward.
Connect the latch electrical connector.
Connect the lock cylinder rod to the latch.

Fig 3: Front Side Door Latch (1 Of 2)
Courtesy of SUZUKI OF AMERICA CORP.
Install the outside handle bracket.
Connect the outside handle rod to the latch.

Fig 4: Front Side Door Latch And Front Door Window Regulator Module
Courtesy of SUZUKI OF AMERICA CORP.
Install the front door window regulator module. Refer to INSTALLATION PROCEDURE .