LEMON Manuals: Even more car manuals for everyone
Home >> Suzuki >> 2012 >> Equator Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 17 (Security And Locks) >> Diagnostic Information and Procedures >> DTC B2495 >> Circuit / System Testing

Circuit / System Testing

WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition OFF, disconnect the harness connector at the I/P fuse block.
  2. Connect a test lamp between the supply voltage circuit terminal 20 and ground.
  3. Command the liftgate latch to release by pressing the liftgate switch. The test lamp should turn ON and OFF while pressing and depressing the liftgate switch.
    • If the test lamp is always ON, test the supply voltage circuit for a short to voltage. If the circuit tests normal, replace the BCM.
    • If the test lamp is always OFF, test the supply voltage circuit for a short to ground. If the circuit tests normal, replace the BCM.
  4. If all circuits test normal, replace the I/P fuse block.
scientia non olet · About LEMON Manuals