Input and Output Speed Sensor Removal

WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.

Reference: TRANSMISSION FLUID DRAINING .

Fig 1: Identifying Input & Output Speed Sensor Harness Assembly

Courtesy of SUZUKI OF AMERICA CORP.

NOTE: Do not damage the speed sensors or transaxle case.

Disconnect the input and output speed sensor harness assembly (71) from the TCM.
Disconnect the input and output speed sensor harness assembly (71) from the output speed sensor (62) and the input speed sensor (73).
Remove the speed sensor bolts (61).
Remove the output speed sensor (62) and the input speed sensor (73).
Remove the speed sensors O-rings (63).
Inspect the speed sensors for damage.