LEMON Manuals: Even more car manuals for everyone
Home >> Suzuki >> 2012 >> Equator Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 13 (Lighting Systems) >> Repair Instructions >> Fog Lamp Aiming >> Aiming Procedure

Aiming Procedure

WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Fog Lamp Aiming Procedure
G04845099Courtesy of SUZUKI OF AMERICA CORP.
  1. Park the vehicle 7.6 m (25 ft) away from the target screen.
  2. Measure from the center of the fog lamp to the ground line. Using this measurement, mark the horizontal centerline (2) of the fog lamp on the target screen directly in front of the vehicle.
  3. Turn ON the fog lamps. The top of the fog lamp beam image (4) on the target screen should be 102 mm (4 in) below the center of the fog lamp lens height.
    Fig 2: Identifying Adjusting Screw On Fog Lamp Top
    G04845100Courtesy of SUZUKI OF AMERICA CORP.
  4. Adjust the fog lamp as required, using the adjusting screw (1) on the top of the fog lamp.
  5. Turn OFF the fog lamps.