Circuit/System Testing
WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.
- Ignition OFF, disconnect the harness connector at the DRL ambient light sensor.
- Ignition OFF, test for less than 1 Ω of resistance between the low reference circuit and ground.
- If greater than 1 Ω, test the low reference circuit for a short to voltage or an open/high resistance. If the circuit tests normal, replace the BCM.
- Ignition ON, test for 4.8-5.2 volts between the 5-volt reference circuit and ground.
- If less than the specified range, test the 5-volt reference circuit for a short to ground or an open/high resistance. If the circuit tests normal, replace the BCM.
- If greater than the specified range, test the 5-volt reference circuit for a short to voltage. If the circuit tests normal, replace the BCM.
- If all circuits test normal, test or replace the DRL ambient light sensor.