LEMON Manuals: Even more car manuals for everyone
Home >> Suzuki >> 2012 >> Equator Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 13 (Lighting Systems) >> Diagnostic Information and Procedures >> DTC B2645 >> Circuit/System Testing

Circuit/System Testing

WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn OFF the ignition.
  2. Disconnect the ambient light sensor.
  3. Turn ON the ignition.
  4. Install a scan tool and display the Ambient Light Sensor parameter in the BCM data list.
    • If the scan tool parameter is less than 7 volts, locate and repair an open, high resistance, or short to ground in the ambient light sensor signal circuit, or replace the ambient light sensor.
    • If the scan tool parameter is greater than 10.5 volts, locate and repair a short to voltage in the ambient light sensor signal circuit.
  5. If circuits test OK, replace the BCM.
scientia non olet · About LEMON Manuals