ID Registration (With Transmitter Activation Tool)

1. Connect the SDT scan tool.
2. Select ID REGIST under BCM.
3. Touch "BCM" on "SELECT SYSTEM" screen.
4. With the transmitter activation tool pushed against the Front Left tire air valve, press the button for 5 seconds. See Fig 1. The hazard lights will flash twice to indicate that the transmitter ID was registered.
5. Repeat procedure for each wheel, in order: Front Left, Front Right, Rear Right, Rear Right.
   NOTE: Be sure to register the IDs in the specified order, or the self-diagnostic results display will not function properly.
6. After completing all ID registrations, press "END" to complete the procedure.

Fig 1: Identifying Transmitter Activation Tool (J-45295)

Courtesy of NISSAN MOTOR CO., U.S.A.