TPMS Reminder Reset - Procedure 01: Notes

NOTE: If spare tire has been used, or if a wheel or tire pressure sensor has been replaced, the tire pressure sensors must be registered, using a Suzuki scan tool (SDT) and a transmitter activation tool (J-45295).

NOTE: In high altitude areas, the warning light may not turn off even after adjusting tire pressures. In this case, adjust inflation pressure to a slightly higher pressure than specified.

NOTE: If warning light is flashing, ensure TPM system sensors are registered. If warning light is still on or flashing after adjusting tire pressure and registering system sensors, there is a problem in the TPM system.