LEMON Manuals: Even more car manuals for everyone
Home >> Suzuki >> 2012 >> Equator Base >> Repair and Diagnosis (Single Page) >> External Pages >> Different car >> Section 33 (Power Assisted Steering System) >> Repair Instructions >> Steering Gear Cylinder Pipe Assembly and Seals Replacement - Off Vehicle >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Steering Gear Housing, Steering Gear Pipe, And Fittings
G04844047Courtesy of SUZUKI OF AMERICA CORP.
  1. Disconnect the steering gear pipe fittings (2) from the steering gear housing and remove the steering gear pipe (1). Remove and discard the O-ring seals.
    Fig 2: Identifying Steering Gear, Steering Gear Pipe, And Fittings
    G04844048Courtesy of SUZUKI OF AMERICA CORP.
  2. Disconnect the steering gear pipe fittings (2) from the gear housing and remove the steering gear pipe (1). Remove and discard the O-ring seals.
scientia non olet · About LEMON Manuals