LEMON Manuals: Even more car manuals for everyone
Home >> Suzuki >> 2012 >> Equator Base >> Repair and Diagnosis (Single Page) >> Electrical >> Gauges >> Instrumentation/Driver Info./Horn >> Diagnostic Information and Procedures >> Fuel Level Sensor Signal Circuit Check >> Component Function Check

Component Function Check

DIAGNOSIS PROCEDURE CHART

Step Action YES NO
1  COMBINATION METER INPUT SIGNAL 
  1. Select "Meter / M&A" on SDT.
  2. Using "FUEL METER" of "Data list", compare the value of data list with fuel gauge pointer of combination meter.

Does the data list value approximately match the fuel gauge indication? 		 Inspection End. Replace combination meter. Refer to [COMBINATION METER: REMOVAL AND INSTALLATION ].
scientia non olet · About LEMON Manuals