LEMON Manuals: Even more car manuals for everyone
Home >> Suzuki >> 2011 >> SX4 Base, Automatic CVT >> Repair and Diagnosis >> Brakes >> Traction Control >> Electronic Stability Program >> Diagnostic Information and Procedures >> DTC C1017/C1023: Lateral G Sensor in Yaw Rate/G Sensor Assembly Circuit Failure/Assembly >> DTC Troubleshooting

DTC Troubleshooting

C1017/C1023: SYMPTOM TROUBLESHOOTING REFERENCE CHART

Step Action YES NO
1  Was "Electronic Stability Program Check" performed?  Go to Step 2. Go to ELECTRONIC STABILITY PROGRAM CHECK .
2  DTC check for ESP® 
  1. Connect SUZUKI scan tool to DLC with ignition switch turned OFF.
  2. Turn ignition switch ON and check DTC for ESP®.

Are DTC U0073 and/or U0123 detected? 		 Go to applicable DTC troubleshooting. Go to Step 3.
3  Check yaw rate/G sensor 
  1. Check yaw rate/G sensor referring to YAW RATE/G SENSOR ON-VEHICLE INSPECTION .

Is it good condition? 		 Substitute a known-good ESP® hydraulic unit/control module assembly and recheck. Substitute a known-good yaw rate/G sensor and recheck.
scientia non olet · About LEMON Manuals