Tightening Torque Specifications
CAUTION:
For fastener with * (asterisk) below, be sure to tighten it according to specified procedure in "Repair Instructions".
TIGHTENING TORQUE SPECIFICATION
| Fastening part | Tightening torque | ||
|---|---|---|---|
| N.m | kgf-m | lbf-ft | |
| Clutch switch lock nut | 7.5 | 0.8 | 5.5 |
| Clutch fluid hose bracket nut | 10 | 1.0 | 7.5 |
| Clutch master cylinder attaching nut | 23 | 2.3 | 17.0 |
| Clutch operating cylinder assembly mounting bolt | 10 | 1.0 | 7.5 |
| Clutch fluid pipe flare nut | 16 | 1.6 | 11.5 |
| Flywheel bolt | 70 | 7.1 | 52.0 |
| Clutch cover bolt | 23 | 2.3 | 17.0 |
NOTE:
The specified tightening torque is also described in the following.
CLUTCH COVER, CLUTCH DISC AND FLYWHEEL COMPONENTS
CLUTCH COVER, CLUTCH DISC AND FLYWHEEL COMPONENTS
Reference:
For the tightening torque of fastener not specified in this section, refer to FASTENER INFORMATION .