ECM Internal Circuit / Memory Monitor
OPERATION (1 OF 4)
| DTC | P0560 |
| Monitor execution | Continuous |
| Monitoring duration | 5 sec. |
OPERATION (2 OF 4)
| DTC | P0601 |
| Monitor execution | Once per driving cycle |
| Monitoring duration | Not applicable |
OPERATION (3 OF 4)
| DTCs | P0607, P2610 |
| Monitor execution | Not applicable |
| Monitoring duration | Not applicable |
OPERATION (4 OF 4)
| DTC | P0630 |
| Monitor execution | Not applicable |
| Monitoring duration | 2 sec. |
ENABLE CONDITIONS
| Parameter | Min. | Max. |
|---|---|---|
| P0560 | ||
| Engine speed | 500 RPM | - |
| Battery voltage | 11 V | - |
| P0601, P0607, P2610 | ||
| None | ||
| P0630 | ||
| When at engine start after writing VIN | ||
TYPICAL MALFUNCTION THRESHOLDS
| P0560: | ECM power voltage < 2.5 V |
| P0601: | Checksum error |
| P0607: | Processor error |
| P0630: | Printable ASC II data length not 17 bytes / Calculated check sum not equal to stored value |
| P2610: | Soak timer error |