Special Service Tool

WARNING: This page is about a different variant/trim than selected.

The actual shapes of Kent-Moore tools may differ from those of special service tools illustrated here.

SPECIAL TOOLS CHART

Tool number (Kent-Moore No.) Tool name		Description
KV40104000 (-) Flange wrench	Courtesy of SUZUKI OF AMERICA CORP.	Removing self-lock nut Installing self-lock nut 85 mm (3.35 in) 65 mm (2.56 in)
ST33290001 (J-34286) Puller	Courtesy of SUZUKI OF AMERICA CORP.	Removing front oil seal Removing rear oil seal Removing metal bushing
KV38100500 (-) Drift	Courtesy of SUZUKI OF AMERICA CORP.	Installing front oil seal Installing rear oil seal Installing rear bearing Installing front bearing 80 mm (3.15 in) dia. 60 mm (2.36 in) dia.
KV40105310 (-) Drift	Courtesy of SUZUKI OF AMERICA CORP.	Installing dust cover 89 mm (3.50 in) dia. 80.7 mm (3.17 in) dia.
KV38100200 (-) Drift	Courtesy of SUZUKI OF AMERICA CORP.	Removing sun gear assembly and planetary carrier assembly Removing input bearing Installing sun gear assembly and planetary carrier assembly 65 mm (2.56 in) dia. 49 mm (1.93 in) dia.
ST30720000 (J-25405) Drift	Courtesy of SUZUKI OF AMERICA CORP.	Installing input bearing Installing input oil seal Installing carrier bearing 77 mm (3.03 in) dia. 55 mm (2.17 in) dia.
KV32102700 (-) Drift	Courtesy of SUZUKI OF AMERICA CORP.	Installing mainshaft rear bearing 48 mm (1.89 in) dia. 41 mm (1.61 in) dia.
KV40104830 (-) Drift	Courtesy of SUZUKI OF AMERICA CORP.	Installing input oil seal 70 mm (2.76 in) dia. 63.5 mm (2.50 in) dia.
ST35300000 (-) Drift	Courtesy of SUZUKI OF AMERICA CORP.	Removing carrier bearing Installing metal bushing Removing front bearing 59 mm (2.32 in) dia. 45 mm (1.77 in) dia.
ST30021000 (J-22912-01) Puller	Courtesy of SUZUKI OF AMERICA CORP.	Removing carrier bearing Removing front bearing Removing rear bearing
ST33710000 (-) Drift	Courtesy of SUZUKI OF AMERICA CORP.	Removing needle bearing Removing metal bushing Removing rear bearing 89 mm (3.5 in) 30 mm (1.18 in) dia. 24 mm (0.94 in) dia.
ST35325000 (-) Drift bar	Courtesy of SUZUKI OF AMERICA CORP.	Removing metal bushing 215 mm (8.46 in) 25 mm (0.98 in) dia. M12 x 1.5P
ST33220000 (-) Drift	Courtesy of SUZUKI OF AMERICA CORP.	Installing needle bearing 37 mm (1.46 in) dia. 31 mm (1.22 in) dia. 22 mm (0.87 in) dia.
ST27863000 (-) Drift	Courtesy of SUZUKI OF AMERICA CORP.	Installing carrier bearing 75 mm (2.95 in) dia. 62 mm (2.44 in) dia.
ST30901000 (J-26010-01) Drift	Courtesy of SUZUKI OF AMERICA CORP.	Installing rear bearing Installing front bearing 79 mm (3.11 in) dia. 45 mm (1.77 in) dia. 35.2 mm (1.38 in) dia.