LEMON Manuals: Even more car manuals for everyone
Home >> Suzuki >> 2011 >> Equator Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 33 (Power Assisted Steering System) >> Repair Instructions >> Steering Gear Cylinder Pipe Assembly and Seals Replacement - Off Vehicle >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.
  1. Inspect the cylinder pipes for the following items, replace as necessary:
    • Cracks
    • Dents
    • Damage to the threads
  2. Lubricate and install the new O-rings seals onto the cylinder pipes.
    Fig 1: Identifying Steering Gear, Steering Gear Pipe, And Fittings
    G04844049Courtesy of SUZUKI OF AMERICA CORP.
  3. Position the steering gear pipe (1) to the steering gear. Loosely install the steering gear pipe fittings (2).
    Fig 2: Identifying Steering Gear Housing, Steering Gear Pipe, And Fittings
    G04844050Courtesy of SUZUKI OF AMERICA CORP.
  4. Position the steering gear pipe (1) to the steering gear. Loosely install the steering gear pipe fittings (2).
    CAUTION:

    Refer to FASTENER NOTICE .

  5. Tighten the steering gear pipe fittings

    Tightening torque 

    Tighten to 25 N.m (18 lb ft). 

scientia non olet · About LEMON Manuals