LEMON Manuals: Even more car manuals for everyone
Home >> Suzuki >> 2011 >> Equator Base >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Immobilizer Control System >> Diagnostic Information and Procedure >> ECM Re-Communicating Function: Special Repair Requirement

ECM Re-Communicating Function: Special Repair Requirement

DIAGNOSIS PROCEDURE

Step Action YES NO
1  PERFORM ECM RE-COMMUNICATING FUNCTION 
  1. Install ECM.
  2. Using a registered key (*2), turn ignition switch to "ON". *2: To perform this step, use the key that has been used before performing ECM replacement.
  3. Maintain ignition switch in "ON" position for at least 5 seconds.
  4. Turn ignition switch to "OFF".
  5. Start engine.

Can engine be started? 		 Procedure is completed. Initialize control unit. Refer to SDT Operation Manual.
scientia non olet · About LEMON Manuals