LEMON Manuals: Even more car manuals for everyone
Home >> Suzuki >> 2011 >> Equator Base >> Repair and Diagnosis (Single Page) >> Suspension >> Wheel Alignment >> Front Suspension & Wheel Alignment >> Repair Instructions >> Front Wheel Alignment: On-Vehicle Service >> The Alignment Process

The Alignment Process

IMPORTANT: Use only the alignment specifications listed in this Service Manual. Refer to [SERVICE DATA AND SPECIFICATIONS ].
  1. When displaying the alignment settings, many alignment machines use "indicators": (Green/red, plus or minus, Go/No Go). Do NOT use these indicators  .
    • The alignment specifications programmed into your alignment machine that operate these indicators may not be correct.
    • This may result in an ERROR.
  2. Some newer alignment machines are equipped with an optional "Rolling Compensation" method to "compensate" the sensors (alignment targets or head units). Do NOT use this "Rolling Compensation" method. 
    • Use the "Jacking Compensation" method. After installing the alignment targets or head units, raise the vehicle and rotate the wheels 1/2 turn both ways.
    • See Instructions in the alignment machine you are using for more information.
scientia non olet · About LEMON Manuals