LEMON Manuals: Even more car manuals for everyone
Home >> Suzuki >> 2011 >> Equator Base >> Repair and Diagnosis (Single Page) >> Engine Performance >> System >> Engine General Information And Diagnosis (Qr25DE) - (2 Of 5) >> DTC P0340: CMP Sensor (PHASE) >> DTC Confirmation Procedure >> Notes

DTC Confirmation Procedure: Notes

NOTE: If DTC Confirmation Procedure has been previously conducted, always turn ignition switch OFF and wait at least 10 seconds before conducting the next test.

TESTING CONDITION: 

Before performing the following procedure, confirm that battery voltage is more than 10.5V with ignition switch ON. 

scientia non olet · About LEMON Manuals