LEMON Manuals: Even more car manuals for everyone
Home >> Suzuki >> 2011 >> Equator Base >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Communication Devices >> Body Electrical Control System >> Diagnostic Information and Procedure >> Body Control System: Configuration >> Special Repair Requirement

Special Repair Requirement

DIAGNOSIS PROCEDURE

Step Action YES NO
1  WRITING VEHICLE SPECIFICATION 
Perform "WRITE CONFIGURATION" with SDT.		 GO TO 2 GO TO 3
2  PERFORM "WRITE CONFIGURATION - Config file" 
Perform "WRITE CONFIGURATION - Config file" with SDT.		 Work End.  
3  PERFORM "WRITE CONFIGURATION - Manual selection" 
For "WRITE CONFIGURATION - Manual selection", using the following chart, identify the correct model and configuration list.
Confirm and/or change setting value for each item according to the configuration list. Depending on SDT software version being used, some or all of the write configuration items shown in the following configuration lists may be displayed. If an item does not display on the SDT "WRITE CONFIGURATION - Manual selection" screen, then it is an auto setting item and it cannot be manually set or changed.		 Work End.  
scientia non olet · About LEMON Manuals