Tightening Torque Specifications
WARNING: This page is about a different variant/trim than selected.
CAUTION:
For fastener with * (asterisk) below, be sure to tighten it according to specified procedure in "Repair Instructions".
TIGHTENING TORQUE SPECIFICATIONS
| Fastening part | Tightening torque | ||
|---|---|---|---|
| N.m | kgf-m | lbf-ft | |
| Fluid pressure check hole bolt | 7.5 | 0.76 | 5.5 |
| CVT fluid drain plug | 34 | 3.5 | 25.0 |
| Transmission range sensor bolt | 5.9 | 0.60 | 4.5 |
| Manual select lever nut | 17 | 1.7 | 12.5 |
| Transmission range sensor bolt | 5.9 | 0.60 | 4.51 |
| Primary pulley speed sensor bolt | 5.9 | 0.60 | 4.5 |
| Secondary pulley speed sensor bolt | 5.9 | 0.60 | 4.5 |
| CVT oil pan bolt* | 7.9 | 0.81 | 6.0 |
| CVT fluid cooler bracket bolt* | 25 | 2.5 | 18.5 |
| CVT fluid cooler bolt | 13 | 1.3 | 9.5 |
| Torque converter No. 1 and No. 2 bolt | 23 | 2.3 | 17.0 |
NOTE:
The specified tightening torque is described in the following.
SELECT LEVER ASSEMBLY COMPONENTS
SELECT CABLE COMPONENTS
CVT ASSEMBLY COMPONENTS
SELECT LEVER ASSEMBLY COMPONENTS
SELECT CABLE COMPONENTS
CVT ASSEMBLY COMPONENTS
Reference:
For the tightening torque of fastener not specified in this section, refer to FASTENERS INFORMATION .