LEMON Manuals: Even more car manuals for everyone
Home >> Suzuki >> 2010 >> SX4 Base, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Continuously Variable Transaxle (CVT)) >> Repair Instructions >> CVT Fluid Check >> Notes

CVT Fluid Check: Notes

WARNING: This page is about a different variant/trim than selected.
CAUTION:
  • Do not use any fluid other than specified CVT fluid. Use of any fluid other than specified CVT fluid may cause juddering or some other faulty condition to occur.
  • Do not overfill. Overfilling can cause foaming and loss of fluid through breather. Then slippage and transaxle failure can result.
  • Use lint-free paper not cloth rags.
  • Do not reuse CVT fluid.
  • In the following cases, change CVT fluid.
    • When replacing CVT assembly
    • After driving under excessive load
NOTE:
  • Be sure to perform CVT fluid level check before checking any service on CVT.
  • Do not replenish or drain CVT fluid before each test.
scientia non olet · About LEMON Manuals