LEMON Manuals: Even more car manuals for everyone
Home >> Suzuki >> 2010 >> Grand Vitara Base, Automatic >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (Automatic Transaxle - 5AT) >> Repair Instructions >> TCM Learning Control Initialization

TCM Learning Control Initialization

WARNING: This page is about a different variant/trim than selected.
  1. Connect scan tool to DLC (1) with ignition switch OFF.

    Special Tool 

    (A): SUZUKI scan tool (SUZUKI-SDT) 

    Fig 1: Connecting Scan Tool To Data Link Connector (DLC)
    G06500075Courtesy of SUZUKI OF AMERICA CORP.
  2. Start engine and shift selector lever to "P" range.
  3. Select "Misc Test" mode on scan tool.
  4. Perform "AT learned initialize" on scan tool.
scientia non olet · About LEMON Manuals