Removal Procedure

WARNING: This page is about a different car, the 2008 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.

Remove the battery tray. refer to BATTERY TRAY REPLACEMENT .

Fig 1: Identifying Electrical Connector
Courtesy of SUZUKI OF AMERICA CORP.
Disconnect the electrical connector (2) from the output shaft speed sensor.

Fig 2: Identifying Output Speed Sensor And Bolt
Courtesy of SUZUKI OF AMERICA CORP.
Remove the output speed sensor bolt.
Remove the output shaft speed sensor and the O-ring.