LEMON Manuals: Even more car manuals for everyone
Home >> Suzuki >> 2009 >> Equator RMZ-4 >> Repair and Diagnosis >> Transmission >> Automatic Transmission/Transaxle >> Diagnostic information and Procedures >> DTC P1710 A/T Fluid Temperature Sensor Circuit >> Component Inspection >> A/T Fluid Temperature Sensor 1

A/T Fluid Temperature Sensor 1

  1. Remove control valve with TCM. Refer to [CONTROL VALVE WITH TCM AND A/T FLUID TEMPERATURE SENSOR 2: ON-VEHICLE REPAIR ].
  2. Check resistance between terminals.
    Fig 1: Checking Resistance Between A/T Fluid Temperature Sensor 1 Connector Terminals
    G06442820Courtesy of SUZUKI OF AMERICA CORP.
    RESISTANCE SPECIFICATION

    Name Terminal Temperature °C (°F) Resistance (Approx.)
    A/T fluid temperature sensor 1 6 - 7 [SERVICE DATA AND SPECIFICATIONS ]
  3. If NG, replace the control valve with TCM. Refer to [CONTROL VALVE WITH TCM AND A/T FLUID TEMPERATURE SENSOR 2: ON-VEHICLE REPAIR ].
scientia non olet · About LEMON Manuals