LEMON Manuals: Even more car manuals for everyone
Home >> Suzuki >> 2009 >> Equator RMZ-4 >> Repair and Diagnosis (Single Page) >> Engine Performance >> System >> Engine Control System (VQ40DE) - (3 Of 5) >> DTC P1211: TCS Control Unit >> DTC Confirmation Procedure

DTC Confirmation Procedure

TESTING CONDITION: 

Before performing the following procedure, confirm that battery voltage is more than 10.5V at idle. 

  1. Start engine and let it idle for at least 60 seconds.
  2. Check 1st trip DTC.
  3. If 1st trip DTC is detected, go to [P1211 TCS CONTROL UNIT ].
scientia non olet · About LEMON Manuals