LEMON Manuals: Even more car manuals for everyone
Home >> Suzuki >> 2009 >> Equator RMZ-4 >> Repair and Diagnosis (Single Page) >> Engine Performance >> System >> Engine Control System (VQ40DE) - (2 Of 5) >> DTC P0452: EVAP Control System Pressure Sensor >> DTC Confirmation Procedure >> With SDT

With SDT

  1. Start engine and warm it up to normal operating temperature.
  2. Turn ignition switch OFF and wait at least 10 seconds.
  3. Turn ignition switch ON.
  4. Turn ignition switch OFF and wait at least 10 seconds and then turn ON.
  5. Select "Data list" mode with SDT.
  6. Check that "FUEL T/TMP SE" is more than 0°C (32°F).
  7. Start engine and wait at least 20 seconds.
  8. Check 1st trip DTC.
  9. If 1st trip DTC is detected, go to [P0452 EVAP CONTROL SYSTEM PRESSURE SENSOR ].
scientia non olet · About LEMON Manuals