LEMON Manuals: Even more car manuals for everyone
Home >> Suzuki >> 2009 >> Equator RMZ-4 >> Repair and Diagnosis (Single Page) >> Engine Performance >> System >> Engine Control System (VQ40DE) - (2 Of 5) >> DTC P0340, P0345: CMP Sensor (PHASE) >> On Board Diagnosis Logic

On Board Diagnosis Logic

DTC DETECTING CONDITION AND POSSIBLE CAUSE

DTC No. Trouble diagnosis name DTC detecting condition Possible cause
P0340
0340 (Bank 1)		 Camshaft position sensor (PHASE) circuit
  • The cylinder No. signal is not sent to ECM for the first few seconds during engine cranking.
  • The cylinder No. signal is not sent to ECM during engine running.
  • The cylinder No. signal is not in the normal pattern during engine running.
  • Harness or connectors (The sensor circuit is open or shorted)
  • Camshaft position sensor (PHASE)
  • Camshaft (Intake)
  • Starter motor
  • Starting system circuit
  • Dead (Weak) battery
P0345
0345 (Bank 2)
scientia non olet · About LEMON Manuals