Procedure After Replacing ECM: Notes

When replacing ECM, the following procedure must be performed.

1. Perform initialization of immobilizer system and registration of all immobilizer system ignition key IDs. Refer to [ADDITIONAL SERVICE WHEN REPLACING CONTROL UNIT: SPECIAL REPAIR REQUIREMENT ]
2. Perform "VIN Registration" in [PROCEDURE AFTER REPLACING ECM ].
3. Perform "Accelerator Pedal Released Position Learning" in [PROCEDURE AFTER REPLACING ECM ].
4. Perform "Throttle Valve Closed Position Learning" in [PROCEDURE AFTER REPLACING ECM ].
5. Perform "Idle Air Volume Learning" in [PROCEDURE AFTER REPLACING ECM ].