Removal Procedure
WARNING:
Refer to BATTERY DISCONNECT CAUTION .
- Record all of the customers radio station presets.
- Turn OFF all the lamps and accessories.
- Make sure the ignition switch is in the OFF position.
- Grasp the engine control module (ECM) and slide the retainer rearward until the retainer disengages from the 4 clips on the battery cover. Reposition the ECM out of the way.
- Release the side snap retainers (1).
- Remove the battery box cover (3) from the retaining tabs (2).
- Remove the battery box cover (3).
- Loosen the battery negative cable terminal bolt.
- Remove the battery negative cable from the battery.