LEMON Manuals: Even more car manuals for everyone
Home >> Suzuki >> 2007 >> XL7 Base, AWD >> Repair and Diagnosis >> Transmission >> Automatic Transmission >> Repair Instructions >> Output Speed Sensor Replacement >> Removal Procedure

Removal Procedure

  1. Remove the battery tray. Refer to BATTERY TRAY REPLACEMENT .
    Fig 1: Identifying Output Speed Sensor & Electrical Connector
    G04845953Courtesy of SUZUKI OF AMERICA CORP.
  2. Disconnect the electrical connector (2) from the output shaft speed sensor.
    Fig 2: Identifying Output Speed Sensor
    G04845954Courtesy of SUZUKI OF AMERICA CORP.
  3. Remove the output speed sensor bolt.
  4. Remove the output shaft speed sensor and the O-ring.
scientia non olet · About LEMON Manuals