Output Gear Assembly Installation

Reference: TRANSMISSION CASE INSPECTION .

Reference: FRONT DIFFERENTIAL BEARING RACE AND SELECTIVE SHIM INSTALLATION .

Reference: MANUAL SHIFT SHAFT SEAL AND BEARING INSTALLATION .

Reference: FRONT WHEEL DRIVE SHAFT OIL SEAL INSTALLATION .

Reference: FRONT DIFFERENTIAL CARRIER SEAL INSTALLATION .

Fig 1: Identifying Output Gear Assembly

Courtesy of SUZUKI OF AMERICA CORP.

1. Rotate the transmission case so that the I.D. tag is facing up.
2. Install the output gear assembly (12) into the transmission case assembly.
   Fig 2: Identifying Output Gear Retaining Ring & Output Gear Assembly

   Courtesy of SUZUKI OF AMERICA CORP.
3. Install the output gear retaining ring (48) into the output gear assembly (12) groove.

   Reference: ROTATIONAL TORQUE MEASUREMENT .

   Reference: LOW AND REVERSE CLUTCH PISTON INSTALLATION .