LEMON Manuals: Even more car manuals for everyone
Home >> Suzuki >> 2007 >> XL7 Base, AWD >> Repair and Diagnosis >> Transmission >> Automatic Transmission >> Repair Instructions >> Control Valve Body Cover Replacement >> Removal Procedure

Removal Procedure

  1. Raise the vehicle. Refer to LIFTING AND JACKING THE VEHICLE .
  2. Remove the left front wheel and tire assembly. Refer to REMOVAL PROCEDURE .
  3. Remove the left and right splash shield. Refer to ENGINE SPLASH SHIELD REPLACEMENT - LEFT SIDE and ENGINE SPLASH SHIELD REPLACEMENT - RIGHT SIDE .
  4. Remove the front engine mount. Refer to REMOVAL PROCEDURE .
  5. Remove the transaxle oil cooler lines and seals from the transaxle. Refer to REMOVAL PROCEDURE .
    Fig 1: Identifying Control Valve Body Cover (1 Of 2)
    G04845957Courtesy of SUZUKI OF AMERICA CORP.
  6. Remove the 9 TORX bolts (2) from the control valve body cover (1).
    NOTE: Do not pry with a tool on the transaxle control valve body cover, case or sealing surfaces.
  7. Remove control valve body cover.
scientia non olet · About LEMON Manuals